apartment therapy changing the world, one room at a time


Good Question: Best Burr Grinder Under $100

2008_04_22-Grinder.jpgI am looking to buy a new coffee grinder for my husband, a coffee lover. We currently have a Cuisinart blade grinder, but I would like to upgrade to a burr grinder. We use both a French press and a Cuisinart drip pot. Can anyone suggest a great grinder for under $100?

Thanks!
- Kristen

 
 

Kristen, we really researched this one for you. We went to our favorite coffee shop and roastery and quizzed the coffee geeks there on burr grinders. Here's what they told us.

First off, yes, a burr grinder gives you much more control over the grind than a basic blade grinder (which is what we use too). The blade grinder will just chop indiscriminately as long as you hold down the power button, leaving you with slightly uneven bits of coffee bean. This matters most when you're making coffee that calls for either a very rough grind - French press - or very fine - espresso.

The point is that you don't want rough chunks in your espresso, which will keep the shot from pulling properly, and you also don't want fine grit in your French press, filtering through into your cup.

For drip coffee, a blade grinder is perfectly adequate. As long as it cuts quickly and smoothly and doesn't heat the coffee beans as it grinds, it should do a great job. But if you are drinking espresso and French press on a regular basis, then yes, the burr grinder is a good idea.

However (this was the most emphasized point from our barista friends) a burr grinder must be cleaned and serviced regularly. If you don't clean it as specified pretty much every week, you'll be left with nothing more than a paper weight. (Their words, not ours!)

Burr grinders run anywhere from $60 to $600. We checked Sweet Maria's, our go-to source for the best coffee equipment, since we trust that they don't offer any equipment they wouldn't use themselves. They do not offer any burr grinders under $149. Here's the most economical model they offer:

Maestro Plus Mill, $149

There is one other option. Our roaster friends first recommended a box hand mill. They couldn't speak highly enough of these small, old-fashioned grinders. They actually give you a finer grind than the fancy and expensive commercial model used right there in the shop, and they are far more economical. They also need to be cleaned regularly and adjusted, but they are much less finicky than the electric burr grinders.

The downside, of course, is that you have to put a little elbow grease into grinding your beans. But these old-fashioned beauties may be worth the extra physical effort for the warmth they add to your kitchen. You do have to be careful that you're getting a well-made mill and not a purely decorative object. In the world of manual coffee mills, Zassenhaus is one of the most respected brands. They are finely made and last a long time. Sweet Maria's sells the Zassenhaus line for $70-$120.

Zassenhaus Box Mill, $72.50

Also, check around at your local coffeeshops and on eBay. You can find these for less money. We featured one in our eBay Scavenger today.

We're actually thinking of purchasing a manual coffee grinder soon. Does anyone use one of these on a daily basis? How much elbow grease is really involved in getting a good fine grind?

Any other tips for Kristen from fellow coffee geeks?

(Images: Sweet Maria's and Coffee Storehouse)

Tags

Good Questions, Appliances - small, coffee, coffee grinder, burr grinder

Related Links

Share

Comments (11)

When I first moved into my current apartment, I was given a Zassenhaus manual grinder as a housewarming gift. I stopped drinking coffee because it was such a pain to grind the beans and I didn't want to spend money on another appliance. I also found it difficult to clean.
In short, I would not recommend a manual grinder. But if you enjoy coffee, and the process of making coffee, you might like the grinder. I like making pasta by hand, but I know some people would never do it. I like coffee, but not enough to grind it by hand.

posted by asprygal on 2008-04-22 11:47:55
view asprygal's profile

Oh, but that Zassenhaus Turkish Mill looks gorgeous in the photo!

posted by viola on 2008-04-22 12:02:04
view viola's profile

I use a Zass knee mill every day for French press coffee and don't find it to be much trouble at all. Depending on how lazy I'm feeling, grinding the beans takes between 20 seconds to 1 minute. And it's not like you have to put a lot of force into it either -- just rotate the handle as slowly or as quickly as you want. The quality of the pressed coffee is so much better with this grinder than with a cheap blade grinder I had: it's smoother-tasting and less muddy.

posted by bubble on 2008-04-22 12:23:53
view bubble's profile

I have a Maestro Classic burr grinder, and I'm very happy with it. If you drink espresso, a burr grinder is the only way to go because it ensures the optimal kind of water/bean contact during extraction.

posted by mlt43 on 2008-04-22 12:46:49
view mlt43's profile

I've got the Solis Maestro Plus, and I love it. It is extremely easy, and the grind is consistent. I only clean it once every 2-3 months (when I happen to remember, not because of any apparent need). For a point of reference on that frequency, I grind about 3 tablespoons of beans per day.

posted by 22209 on 2008-04-22 13:55:32
view 22209's profile

I bought a beautiful old Zassenhaus manual grinder at Ebay some years ago and I'm using it almost every day to grind my coffee. I don't think that it's a lot of work, definitely not exhausting, not even when I'm lazy and sleepy in the morning. I love it!

posted by wenkexin on 2008-04-22 18:07:41
view wenkexin's profile

P.S.: I just checked Ebay Germany (since I'm currently living in Germany): Vintage coffee mills are incredibly cheap here, ca. 10 € (= 15$)... http://search.ebay.de/search/search.dll?from=R40&_trksid=m37&satitle=zassenhaus kaffeem%C3%BChle&category0=

posted by wenkexin on 2008-04-22 18:11:57
view wenkexin's profile

I really like the Krups Burr grinder for $49 or $59 dollars. It seems to do a good job on various settings for courseness. Sometimes I feel like a French press and sometimes I make a pot. The one downside is that the unit doesn't hold a lot of beans so you do need to refill often but it is easy to clean and works.

posted by den on 2008-04-22 23:24:29
view den's profile

I just bought one of these guys, and I dig it pretty hard. You have to refill it pretty often, and it is of course hand crank... but that's what I wanted, so it's perfect.

http://www.rusticcoffeemills.com/

posted by kasa on 2008-04-23 22:25:49
view kasa's profile

Can anyone please comment on the process of cleaning burr grinders, manual or otherwise. I'm thinking of getting one. Thanks

posted by mjourdanm on 2008-04-25 11:46:25
view mjourdanm's profile

Don't make the mistake to buy anything but a Baratza Maestro at that price. Everything else under $300 does not compete in the least.

posted by joebelt on 2008-04-26 07:48:10
view joebelt's profile