Project: Dishwasher Panel's Functional Facelift
We've been telling you that even renters can improve their kitchens, and today's Jumpstart project from Annie fits right in! She took an ugly eyesore in her little kitchen and made it a bright spot of color and a scratching post for her cat. Cute kitty, Annie's explanation, and how-to photos below.
Annie:
My apartment is very small and there isn't much room for a big cat scratching post (which are generally ugly anyway), AND I have an unsightly bright white metal panel on the side of the dishwasher instead of a real wood panel that could match the cabinetry (result of a cheap landlord). With this project, I've created a giant scratching post and covered up the ugly side of the dishwasher with inexpensive and cat-friendly sisal.
TOOLS:
3'x5' sisal rug, cut to size with scissors
2'x4' 1/8" thick hardboard panel, cut to size
Staple gun
Staples
Clear packing tape to prevent fraying of cut edges of rug
3/4" long nuts and bolts to secure panel to existing dishwasher side panel
Chalk
Power screwdriver
Measuring tape
STEPS:
1. Measure dimensions of existing metal dishwasher side panel.
2. Have hardboard panel cut down to same size of metal panel at Home Depot.
3. Drill holes into hardboard panel in the same locations as the existing metal panel bolts.
4. Trace size of panel onto the sisal rug. Allow approximately 1 1/2"-2" of extra on all sides and cut with scissors. (Note that I bought a larger than needed rug so that the weave of the sisal was going the best direction for catching the cat's claws.)
5. Lay the hardboard panel on the cut sisal and wrap the edges over.
6. Staple the flaps down to the hardboard on all four edges using longish staples every 1/2" or so. Make sure to try to stretch the sisal as much as possible while doing this so that it doesn't stretch out later with use.
7. Tape the raw cut edges of the sisal to the hardboard to prevent fraying.
8. Remove existing metal side panel from dishwasher side brackets with power screwdriver.
9. Use new longer nuts and bolts to reattach the new sisal panel to the old metal panel and reattach to existing brackets.
10. Let the kitty go nuts!
• Want to enter your own kitchen project? You still have some time. Click through below for the entry form, and check out ideas for kitchen projects here.
© 2009 Apartment Therapy
i love the towel holder in the background. where did it come from?
view thinkingwoman's profile
What a great idea. We don't have a dishwasher, but we rent a 1980's mobile and I KNOW there are places I can use this idea. :)
view Muffinator's profile
Annie, have you noticed any reduction in noise from the dishwasher? It seems like the hardwood panel with a heavy fiber cover would make a much better noise barrier than the metal panel.
view Slim's profile
I did a similar thing to my fridge! I used leftover staircase carpet pads and hot glued them on. My kitty had a nasty habit of scratching the fridge when she was hungry...
view lemook's profile
@ thinkingwoman: its from ikea, of course! Its called the BEKVÄM towel rack and can be found here: http://www.ikea.com/us/en/catalog/products/10101046 .
view Jose A's profile
Nice idea. I wonder how it would look with sisal or soft cork.
view heather77's profile
Bravissima! What a clever, useful, furniture saving idea.
view Splomo's profile
thanks for the comments, everyone.
(slim: unfortunately, i haven't noticed the dishwasher being more quiet. i think it'd take quite a lot to hush such a cheap machine.)
view kitkatkasha's profile