Our February Jumpstart contest is underway, and here is our first kitchen entry! Bojo created a clever series of hooks in the kitchen using inexpensive materials and a set of flatware. He says that this project makes the most sense in the kitchen but could be used for towel racks in the bathroom, coats racks at the front door or closets or just about anything else that can be stored by hanging. We like it, but what do you think? Read on for all the details and photos, and give him a thumbs up if you find this helpful!
3/16 steel drill bit
Counter sink bit
#8 drywall screws
Stainless steel silverware set
1. Locate area of contact on the back of utensil (For the spoon this will be where it would hold the most liquid; you will need to flatten any forks and bend the prongs out.)
2. Drill hole in utensil
3. Use countersink bit to open the hole for the screw. Make sure it is big enough that the screw head is flush with the surface of utensil when installed.
4. Use the claw part of your hammer to bend the handle of the utensil forward to create a hook. You can use both the top of the utensil (spoon/fork) as well as the "handle hook" for securing your kitchen hardware.
5. Using the drywall screw install each piece in pattern of your choice (staggering will help utilize space for different size kitchen tools).
The $0.99 store.
• Want to enter your own kitchen project? You still have some time. Click through below for the entry form, and check out ideas for kitchen projects here.